4
Confirm the BOD menu item with
5
Select the BOD setup menu item with
6
Confirm the BOD setup menu item with
7
Select the Scanner menu item with
8
Confirm the Scanner menu item with
The selection field for the scanner setting appears.
9
Select the required use of the barcode reader
(automatic or manual) with
10
Confirm the settings with [ESC].
Note
If the scanner is set to automatic, always check all the data
shown on the display during a measurement first, and then
terminate the entries by reading in the name in the name
field. After reading in the barcode, the BOD measurement
starts automatically.
g
.
82
.
g
.
82
.
g
.
82
.
BOD
151