Determining The Data Format - wtw inoLab Level 3 Operating Manual

Data output
226
8 Confirm the selected baud rate with
The selected baud rate is active (✔).
9 Terminate the Menu mode with

12.3.3 Determining the data format

You can determine the form in which the numerical data is
sent to the RS232/REC interface. The selection of the data
format type determines the data transmission:
l ASCII
the data is transmitted in the same form as it is displayed:
recommended for external printers on the RS232/REC
interface
l Data
The data is transmitted with separators.
The data can easily be saved in a database if it is
transmitted to a PC.
1 Switch to the Menu mode.
46
2 Use
3 Select the RS232/Prt menu item with
4 Confirm the RS232/Prt menu item with
5 Select the Datformat menu item with
6 Confirm the Datformat menu item with
7 Select the Ascii or Data menu item with
to select the main Opt menu.
g
.
m
.
82
.
g
.
82
.
g
.
82
.