Acoustic Signals - wtw inoLab Level 3 Operating Manual

Selecting acoustic
signals
5.4

Acoustic signals

You can select which events are to trigger an acoustic
signal:
l
Warning messages (Signal)
l
When measuring range limits are exceeded (Limit)
l Each time a key with no function is pressed (no func)
You can select several options at the same time.
1 Switch to the Menu mode.
2 Select the main Opt menu with
3 Select the Setup menu item with
4 Confirm the Setup menu item with
5 Select the Signal menu item with
6 Confirm the Signal menu item with
7 Select the Signal, Limit or no func menu item with
82
.
8 Confirm the selected menu item with
The selected acoustic signal is active (✔).
9 Option:
Activate further acoustic signals (✔).
10 Leave the Menu mode with [ESC].
System settings
46
.
82
.
g
.
82
.
g
.
g
.
55