Measured variable,
ISE
7
Ion concentration
For the inoLab Level 3 measuring modules:
pH, pH/ION, pH/Cond, pH/Oxi and Multi.
7.1
Settings for ISE
We recommend checking the current settings and correcting
them if necessary before a measurement.
7.1.1
Displaying pH/ISE or measured voltage values
In pH/ISE measurements, inoLab Level 3 enables a rapid
changeover between the display of the pH/ISE value (pH)
and voltage (U).
1
Activate the Display mode.
2
Switch to the display of the pH/ISE value with
3
Switch between the measured value display of the
pH/ISE value (pH) and voltage (U) with
7.1.2
Setting up the ISE display
Ion-selective electrodes are connected to the pH/U
connector of the measuring module.
The selection of the measured variable ISE or pH is made in
the main Meas menu. The active pH or ISE setting is marked
with ✔.
1
Switch to the Menu mode.
46
2
Use
3
Select the ISE menu item with
to select the main Meas menu.
Ion concentration
m
46
.
82
.
.
93