wtw inoLab Level 3 Operating Manual page 166

BOD
Editing the
measurement result
Printing the
measurement result
166
9 View the measured data with
the left edge of the display shows the selected line).
10 Select a line containing a measured value with
small arrow on the left edge of the display shows the
selected line).
11 If necessary, use
of the BOD calculation (small * on the right edge of
the display).
The value also appears in the report marked by *.
This value is not used for calculating the BOD value.
12 Print out the result with
82
(a small arrow on
g
to exclude the measured value
p
.
82
(a