6
pH
Measuring modules for the inoLab Level 3:
pH, pH/ION, pH/Cond, pH/Oxi and Multi.
6.1
Settings for pH
We recommend checking the current settings and correcting
them if necessary before a measurement.
6.1.1
Displaying pH/ISE or measured voltage values
For pH measurements, the inoLab Level 3 enables rapid
switching between the display of the pH value (pH) and the
voltage (U).
1
Activate the Display mode.
2
Switch to the display of the pH value with
3
Switch between the measured value display of the
pH value (pH) and voltage (U) with
pH
m
.
46
.
71