Resetting To Default Settings - wtw inoLab Level 3 Operating Manual

6.1.5
You can reset (initialize) the settings for the pH
measurement to the default settings.
In a reset, the following functions for the pH measurement
are reset to the default settings:
Measuring mode
Asymmetry U
Slope S (k) in mV
Calibration procedures
Temperature, manual
pH reset With the reset pH function, all the settings for pH
measurements are reset to the default values.
1
2
3
4

Resetting to default settings

in mV
Asy
Switch to the Menu mode.
46
Use to select the main Cal menu.
Select the Reset pH menu item with
Confirm the selected menu item with
The default settings for pH measurements have been
restored.
The Menu mode is terminated.
pH
0 mV
-59.16 mV
AutoCal TEC
25 °C
82
.
g
.
pH
75