Modules - wtw inoLab Level 3 Operating Manual

System settings
5.8

Modules

The calibration data can only be assigned to a user name if
the calibration data were recorded with the current
combination of terminal and module.
As a result of the registration of the modules, the terminal
recognizes whether the calibration data were stored in the
module with this or another terminal.
The registration of a module to a terminal is made
automatically in the first calibration of a module at a terminal.
If a module is registered at a terminal, the user name with
which the calibration was performed appears on the display
during the prompt of a calibration protocol, and the module
appears in the Registered modules list. This list contains all
registered modules with the module type and serial number.
If a module is not registered at a terminal, a note together
with unknown as the user name appears on the display
during the prompt of a calibration protocol.
Note
The maximum number of registered modules is 16. Further
modules are not registered. Calibrations are nevertheless
possible. Anonymous appears as the user name.
Viewing, printing out and editing the list of Registered
modules is only possible during login with the user name
Admin.
69