Advanced Settings For Ise; Units Of The Ise Display - wtw inoLab 740 Operating Manual

Ion concentration
90
7.2

Advanced settings for ISE

For the inoLab 740 pH/ION measuring module.
7.2.1

Units of the ISE display

You can select the units of the measured value:
1 Switch to the Menu mode.
46
2 Use to select the main Meas menu.
3 Select the ISE menu item with
4 Select the ISE setup menu item with
5 Confirm the ISE setup menu item with
6 Select the Unit menu item with
7 Confirm the Unit menu item with
8 Select a Unit with
9 Confirm the Unit with
The selected Unit is active (
10 If mg/l was selected:
Continue with step 14.
11 If mol/l was selected:
Select a Ion type with
Continue with step 13.
12 If mg/kg, ppm, % was selected:
Enter the density of the sample with
Continue with step 13.
13 Confirm the entry with
The units change over.
14 Switch to the measured value display.
82
.
82
82
.
g
.
82
.
g
.
✔
).
82
.
82
g
or [ESC].
inoLab 740
.
g
.
.
ba75446e05 07/2010