7.4.1
Select the measuring method
For the inoLab Level 3 pH/ION measuring module.
The following methods are supported:
l
Standard Addition (Std Add)
l
Double Standard Addition (Std Add ++)
l
Standard Subtraction (Std Sub)
l
Sample Addition (Smp Add)
l
Sample Subtraction (Smp Sub)
l
Blank value Addition (Bw Add)
1
Switch on the measuring system with
2
Connect the electrode to the measuring module.
3
Connect a temperature probe to the measuring
system so that any temperature differences that are
too high will be indicated during calibration.
4
Keep the standard solutions ready.
5
Adjust the temperature of the standard solutions.
6
Switch to the Menu mode.
46
7
Use
8
Select the ISE menu item with
9
Confirm the ISE menu item with
The ISE measured variable appears on the display
(✔).
to select the main Meas menu.
Ion concentration
e
.
82
.
g
.
115