Printing - wtw inoLab Level 3 Operating Manual

Data output
Printing the display

Printing

stored
data records
220
12.2.4 Printing
p
When the softkey function is shown on the display you
can always print the current display. Use the
print the following data:
l
The data record of the current measured value
l
The data record of a stored measured value
l
The graphical representation of a measured data series
stored with AutoStore (only on the integrated printer)
l Calibration records
1 Start the printout of the currently displayed numerical
or graphical data with
You can also start a printout of the current numerical data
record on the measuring module.
Precondition: AutoRead is not active.
1 Start the printout of the currently displayed numerical
g
data with
If there are stored measured values, you can display and
print them.
1 Switch to the Display mode.
2 Switch to the storage display with
3 Call up the RCL menu with [RCL menu].
4 Option:
Determine the selection criteria for the data in the
RCL filter input window (see section 11.1.3)
5 Select the Print all menu item with
p
.
.
p
softkey to
r
.
82
.