wtw inoLab Level 3 Operating Manual page 171

1 Switch to the Menu mode.
46
2 Use
3 Select the BOD menu item with
4 Confirm the BOD menu item with
5 Select the BOD setup menu item with
6 Confirm the BOD setup menu item with
7 Select the New routine menu item with
8 Confirm the New routine menu item with
The Start measurement window appears.
Note
When defining new routines, the same displays appear as in
the start measurement. However, the measurement of
samples is not shown. When defining routines, [Ok] always
appears instead of the [Start] softkey. For a detailed
description of the process, see section 9.2.2.
Note
Also, an existing routine can be used as a template when
defining new routines.
to select the main Meas menu.
BOD
82
.
g
.
82
.
g
.
82
.
g
.
171