wtw inoLab Level 3 Operating Manual page 156

BOD
Measurement of
blank value
solutions
156
22 Check the data on the display.
l
If the data is correct: Continue with step 24.
l To change the data: Continue with step 23.
23 Enter a name with
reader.
24 Immerse the sensor in the blank value solution.
25 Start the measurement with [Start].
26 Wait for the end of the measurement.
27 Repeat from step 22 to step 26 until all blank value
solutions are measured. Subsequently, the Start
measurement Sample window opens.
82
, external keyboard or barcode