Outputting Data To The Rs232/Rec Interface; Setting The Baud Rate - wtw inoLab Level 3 Operating Manual

12.3.1 Outputting data to the RS232/REC interface

To output data to an external printer/PC, the data output
must be switched to the RS232/REC interface.
1 Switch to the Menu mode.
46
2 Use
3 Select the RS232 menu item with
4 Confirm the RS232 menu item with
The data is output to the RS232/REC interface (✔).
5 Terminate the Menu mode with

12.3.2 Setting the baud rate

The baud rate for the RS232/REC interface must be the
same as the baud rate of the connected devices.
1 Switch to the Menu mode.
46
2 Use
3 Select the RS232/Prt menu item with
4 Confirm the RS232/Prt menu item with
5 Select the Baudrate menu item with
6 Confirm the Baudrate menu item with
82
7 Use to select the required baud rate 1200, 2400,
4800 or 9600.
to select the main Opt menu.
to select the main Opt menu.
Data output
82
.
g
.
m
.
82
.
g
.
82
.
g
.
225