3.5
Updating the terminal software (firmware)
The program "Firmware Update inoLab Terminal Level3
Vx.x" is used to update the firmware of the inoLab Level 3
terminal. The newest firmware version can be downloaded
from the Internet under www.wtw.com.
Prerequisites:
l
PC with Windows 95, 98, or NT operating system
l
Minimum of 2 MB free storage
l
A free (serial) COM-interface
l
Interface cable, AK T-PC (see section 3.1 S
)
DELIVERY
Note
The update takes approx. 20 min.
3.5.1
Checking the version no. of the terminal
firmware
1
Swap to offline mode with [Offline].
2
Swap to the menu with [Menu].
3
Select the Opt menu with
4
Confirm the Opt menu with
5
Select the Setup menu with
6
Confirm the Setup menu with
7
Select the Info... menu with
8
Confirm the Info... menu with
The Info window opens. The version number of the
firmware appears next to Terminal : here "1.2".
Commissioning
COPE OF
46
.
g
.
82
.
g
.
82
.
g
.
29