Switching On The Measuring System - wtw inoLab Level 3 Operating Manual

Commissioning
26
3.3

Switching on the measuring system

After the plug-in power supply unit is connected and the
initializing period is over, the measuring system switches to
standby mode (Standby and the date and time are
displayed).
When you want to measure, switch the system on.
1 Place the terminal and measuring module on a flat
surface and protect them from intense light and heat.
e
2 Press the
The measuring module and probe are initialized.
3 As soon as the measuring module and probe have
been initialized, a selection of user names is
displayed.
4 Select a user name with
l Anonymous Login without password
l Admin
5 Confirm the user profile with OK.
6 If necessary, enter the password with
and start the login with [OK].
7 As soon as the measuring module and probe are
initialized, a measured value appears on the display,
e.g. the pH value.
key or [Online] on the terminal.
82
Login with password
.
82
and
46