Cleaning; Disposal - wtw inoLab Level 3 Operating Manual

Packing
Batteries
Terminal
Measuring module
13.2

Cleaning

Occasionally wipe the outside of the terminal and measuring
module with a damp, lint-free cloth. Disinfect the housing
with isopropanol as required.
Caution
The housing is made of a synthetic material (ABS). Thus,
avoid contact with acetone or similar detergents that contain
solvents. Remove any splashes immediately.
13.3

Disposal

This measuring system is sent out in a protective transport
packing.
We recommend: Keep the packing material. The original
packing protects the instrument against damage during
transport.
This note refers to the battery regulation that applies in the
Federal Republic of Germany. We would ask end-
consumers in other countries to follow their local statutory
provisions.
Note
In compliance with §14 B
to point out that this instrument contains batteries.
Batteries that have been removed must only be disposed of
at the recycling facility set up for this purpose or via the retail
outlet.
It is illegal to dispose of them in household refuse.
Dispose of the measuring instrument as electronic waste at
an appropriate collection point. It is illegal to dispose of the
instrument in household refuse.
Maintenance, cleaning, disposal
R
ATTERY EGULATION
, we would like
235