wtw inoLab Level 3 Operating Manual page 64

System settings
Changing a user
profile
Deleting a user
profile
64
Note
If no setting with the selected number is yet stored, a
message appears when the user profile is stored. Save a
setting (see section 11.2).
It is not possible to log in with a user name without a valid
setting.
1 Open the Administration window (see section 5.6.2).
2 Select a user name with
3 Confirm the user name with [OK].
A dialog opens for changing the Name or Setting of
the user profile.
4 Swap to the Setting field with [Next].
5 Select one of the settings 1 ... 4 with
6 Confirm the Name and Setting with [OK].
The changed user profile appears in the
Administration window.
1 Open the Administration window (see section 5.6.2).
2 Select a user name with
3 Delete the user profile with [X].
A security prompt opens for deleting the user profile.
4 Select Yes with [Next].
5 Confirm the deletion with
The user name is deleted from the list of user names
in the Administration window.
82
.
82
82
.
g
.
.