Displaying Stored Measurement Data Records - wtw inoLab Level 3 Operating Manual

Displaying
automatically stored
measurement data
records
graphically

11.1.3 Displaying stored measurement data records

You can display measured values that have been stored
automatically or manually. Data from the AutoStore memory
can be displayed as a graph or in tabular form.
Data from the manual measurement data record memory
can only be displayed numerically.
1 Switch to the Menu mode.
46
2 Use
3 Select the AutStoGrph menu item with
4 Confirm the AutStoGrph menu item with
5 Select the Open menu item with
6 Confirm the Open menu item with
7 Select a memory location, e.g. Mem 1, with
8 Confirm the selected storage location with
The AutoStoGrph Mem 1 input window is open.
9 Select an available parameter pH, Oxi or Cond (here,
e.g. pH) with
10 Confirm the selected parameter with [Open].
The content of the storage location is displayed in the
form of a graph.
to select the main Mem menu.
82
.
Data storage
82
.
g
.
82
.
g
.
82
.
g
.
199