inoLab 740
ba75446e05
07/2010
12.3.1
Outputting data to the RS232/REC interface
To output data to an external printer/PC, the data output must be
switched to the RS232/REC interface.
1
Switch to the Menu mode.
46
2
Use
to select the main Opt menu.
3
Select the RS232 menu item with
4
Confirm the RS232 menu item with
The data is output to the RS232/REC interface (
5
Terminate the Menu mode with
12.3.2
Setting the baud rate
The baud rate for the RS232/REC interface must be the same as the
baud rate of the connected devices.
1
Switch to the Menu mode.
46
2
Use
to select the main Opt menu.
3
Select the RS232/Prt menu item with
4
Confirm the RS232/Prt menu item with
5
Select the Baudrate menu item with
6
Confirm the Baudrate menu item with
82
7
Use
to select the required baud rate 1200, 2400, 4800
or 9600.
Data output
82
.
g
.
✔
).
m
.
82
.
g
.
82
.
g
.
195