Buckle Chute Section - Horizon Fitness PF-P3100 Manual

1 Installation and Mechanism

1 - 13 Buckle Chute Section

Home Position of Buckle Chute Stopper Home Position of Buckle Chute Stopper
Set the first and second stopper at 57 mm (2.2") from the
entrance of the buckle chute. Align the stopper pointer to the left-
most LED on the buckle chute.
57 mm (2.2")
Stopper Pointer
Stopper Stopper Stopper
LED LED LED LED
Stopper Stopper Stopper Stopper Pointer
57 mm (2.2")
Home Position of Buckle Chute Home Position of Buckle Chute
1 - 13 Buckle Chute Section
Buckle Chute
Section
Stopper
Move Shaft
Timing Pulley
1st Stopper 1st Stopper 1st Stopper
Timing Belt Timing Belt Timing Belt
Handwheel
1st Buckle
2nd Buckle 2nd Buckle 2nd Buckle
Handwheel
1st Buckle 1st Buckle
Proximity Sensor: B21
Lock Screws Lock Screws Lock Screws
Timing Pulley
Stopper
Move Shaft
Section A Section A Section A
2nd Buckle 2nd Buckle
2nd
Stopper
Sensor Bracket
Proximity Sensor Unit Proximity Sensor Unit
Section A Section A Section A
21
1st Buckle 1st Buckle
Chute Stopper Chute Stopper
Lock Lock Lock Lock
Screws Screws Screws Screws
2nd Buckle Chute Stopper 2nd Buckle Chute Stopper
Loosen the lock screws,
and then adjust the position
of the stopper pointer.
Stopper Unit Stopper Unit
Proximity Sensor for 1st Buckle Chute : B21 21
Proximity Sensor for 2nd Buckle Chute : B22 22
When the stopper moves
forward to the gate of the
buckle chute, the whole
sensor bracket slide to the
arrow direction.
Sensor
Spring
503013
1_13_1A
1-14