Select the Commissioning menu
From the "Main menu" of the central apartment unit, select submenu "Com-
missioning" and confirm the selection by pressing the Menu/ok button.
Caution!
Plant stops
Commissioning
Basic configuration...
RF connections...
Device list...
Bus communication...
Configure rooms
Activate the required rooms by selecting a heating/cooling type other than "---"
or by activating function "Supervision only".
Main menu > Commissioning > Basic configuration
> Rooms > Room X > Heating type:
---
Radiator heating slow
Radiator heating fast
Floor heating slow
Floor heating fast
Rad/floor user-defined
Air conditioner (S-mode)
Usually, the standard heating types are enough. Customize settings
only in plants with greatly differing control behavior (see page 99).
20 / 134
Siemens
Building Technologies
You are notified that the plant is being
stopped. Confirm by pressing the
Menu/ok button to shut down the plant
and go to the "Commissioning" menu.
You are now in the "Commissioning "
menu – the plant has been stopped.
It is switched on again only when you
manually exit the "Commissioning "
menu by pressing the Esc button (no
timeout).
Inactive – all relevant room heating informa-
tion and all operating lines are hidden.
(Factory setting)
Radiator heating in buildings with massive
walls, heavy construction.
Radiator heating in buildings with light
walls, light construction.
Floor heating in buildings with massive
walls, heavy construction and massive floor
construction.
Floor heating in buildings with light walls,
light construction and light floor construction.
Control parameters can be manually set.
For rooms with an air conditioner used for
heating.
Synco™ living
Commissioning the system
CE1C2740en
13.12.2010