Checking The Network Status; Program Examples - Mitsubishi Electric R60AD8-G User Manual

Checking the network status

After setting parameters to the master station and the intelligent device station, check whether data link is normally performed
between the master station and the intelligent device station. Check the network status using the CC-Link IE Field Network
diagnostics of the engineering tool.
For how to perform the CC-Link IE Field Network diagnostics from the master station, refer to the following.
 MELSEC iQ-R CC-Link IE Field Network User's Manual (Application)

Program examples

For the program examples, the module labels of the master/local module are used.
Write the programs to the CPU module on the master station.
Classification
Module label
Label to be defined
APPX
214
Appendix 5 Operation Examples of When the Remote Head Module Is Mounted
Label name
GF11_1.bSts_DataLinkError
GF11_1.bnSts_DataLinkError_Station[1]
Define global labels as shown below:
Description
Data link error status of own station
Data link status of each station (station
number 1)
Device
SB0049
SW00B0.0