Notification
When an input signal error is detected, an error is notified as follows.
• Input signal error (1) is stored in the corresponding bit of 'Input signal error detection flag' (Un\G49).
• 'Input signal error detection signal' (XC) turns on.
• The corresponding bit of 'A/D conversion completed flag' (Un\G10) turns off.
• The ALM LED flashes.
In addition, an alarm code is stored in 'Latest alarm code' (Un\G3750).
For details on the alarm codes, refer to the following.
Page 112 List of Alarm Codes
1 FUNCTIONS
1.7 Input Signal Error Detection Function
1
47