Parameter Settings For Plc Cpu - Mitsubishi Electric MELSEC Q Series Programming Manual

3 START-UP PROCEDURES

3.4.2 Parameter settings for PLC CPU

(1) I/O assignment setting
(a) Select "I/O Mix" of 32 points as the safety signal module type, and set the
start device number of safety signal module.
<Screen: GX Works2>
POINT
If the start device number of safety signal module is different from the safety
observation function parameter of Motion CPU, "Safety observation error (error
code: 34)" will occur at the system's power supply ON or after 24-hour continuous
operation.
3 - 11