Mitsubishi Electric R60AD8-G User Manual page 159

CH1 Maximum value
The maximum value of the digital operation value is stored in 16-bit signed binary value.
In the following cases, 'CH1 Maximum value' (Un\G404) is updated with the current value.
• When 'Operating condition setting request' (Y9) is turned on and off and the setting is changed
• When 'Maximum value/minimum value reset request' (YD) is turned on and off
■Buffer memory address
The following shows the buffer memory address of this area.
• CH Maximum value
CH1 CH2 CH3 CH4
404 604 804 1004
• CH Maximum value (in Q compatible mode)
CH1 CH2 CH3 CH4
30 32 34 36
CH1 Minimum value
The minimum value of the digital operation value is stored in 16-bit signed binary value.
In the following cases, 'CH1 Minimum value' (Un\G406) is updated with the current value.
• When 'Operating condition setting request' (Y9) is turned on and off and the setting is changed
• When 'Maximum value/minimum value reset request' (YD) is turned on and off
■Buffer memory address
The following shows the buffer memory address of this area.
• CH Minimum value
CH1 CH2 CH3 CH4
406 606 806 1006
• CH Minimum value (in Q compatible mode)
CH1 CH2 CH3 CH4
31 33 35 37
• For the channel to which the averaging processing is specified, the maximum and minimum values are
stored at every averaging processing time.
• When the scaling function, shift function, digital clipping function, or difference conversion function is used,
values calculated by each function are stored in Maximum value and Minimum value.
CH5 CH6 CH7 CH8
1204 1404 1604 1804
CH5 CH6 CH7 CH8
38 40 42 44
CH5 CH6 CH7 CH8
1206 1406 1606 1806
CH5 CH6 CH7 CH8
39 41 43 45
CH9 CH10 CH11 CH12
2004 2204 2404 2604
CH9 CH10 CH11 CH12

CH9 CH10 CH11 CH12
2006 2206 2406 2606
CH9 CH10 CH11 CH12

Appendix 3 Buffer Memory Areas
CH13 CH14 CH15 CH16
2804 3004 3204 3404
CH13 CH14 CH15 CH16
CH13 CH14 CH15 CH16
2806 3006 3206 3406
CH13 CH14 CH15 CH16
APPX
A
157