Mitsubishi Electric R60AD8-G User Manual page 278

■SIL2 standard program FB (M+SIL2ADG-IEF_WriteDAVal_R)
• Symbol
M+SIL2ADG-IEF_WriteDAVal_R
(1)
B : i_bEN
(2) ST : i_stNFB_ADConv
• Input labels
No. Variable name
(1) i_bEN
(2) i_stNFB_ADConv
• Output labels
No. Variable name
(3) o_bENO
(4) o_bOK
(5) o_w8DADigOutVal
(6) o_uOutEnable
(7) o_uRelayData
*1 If the assigned device is a type of bit, it must be set up as a word-type device.
10 FUNCTIONS
276
10.8 SIL2 A/D Conversion Function
o_bENO : B
o_bOK : B
o_w8DADigOutVal : W
o_uOutEnable : UW
o_uRelayData : UW
Name Data type
Execution command Bit
Standard/safety shared Structure
input data
Name Data type
Execution status Bit
Normal completion Bit
Digital value Word [signed]
D/A output enable/ Word [unsigned]
disable setting
Relay control signal Word [unsigned]
(3)
(4)
(5)
(6)
(7)
Scope
On or off

Default value
Off
Off
0
0
0
Description
On: The FB is activated.
Off: The FB is not activated.
The label specifies standard/safety shared data defined
as follows.
Page 256 Standard/safety shared label definition
Description
On: The execution command is on.
Off: The execution command is off.
The on state indicates that the FB processing has been
completed successfully.
The label sets the device assigned to CH1 to CH8
Digital value of the R60DA8-G for diagnostics.
Areas of 8 words are required regardless of the number
of D/A conversion enabled channels.
The label sets the device assigned to Y00 to Y0F of the
R60DA8-G for diagnostics in a word type.
The label sets the device assigned to Y00 to Y0F of the
*1
RY40PT5B in a word type.
*1