Mitsubishi Electric R60AD8-G User Manual page 177

CH1 Scaling lower limit value
Set a lower limit value for the range of the scale conversion.
For details on the scaling function, refer to the following.
Page 26 Scaling Function
■Buffer memory address
The following shows the buffer memory address of this area.
• CH Scaling lower limit value
CH1 CH2 CH3 CH4
508 708 908 1108
• CH Scaling lower limit value (in Q compatible mode)
CH1 CH2 CH3 CH4
62 64 66 68
■Setting range
The setting range is from -32000 to 32000.
In the channel where a value out of the range is set, a scaling setting range error (error code: 1A1H) occurs.
In the channel where a set value does not satisfy the condition "the scaling upper limit value  the scaling lower limit value", a
scaling upper/lower limit value setting error (error code: 1A2H) occurs.
When 'CH1 Scaling enable/disable setting' (Un\G504) is set to Disable (1), the setting for 'CH1 Scaling lower limit value'
(Un\G508) is ignored.
■Enabling the setting
Turn on and off 'Operating condition setting request' (Y9).
■Default value
The default value is 0 for all channels.
CH1 Digital clipping enable/disable setting
Set whether to enable or disable the digital clipping function.
For details on the digital clipping function, refer to the following.
Page 54 Digital Clipping Function
Setting value
0
1
If a value other than the above is set, a digital clipping enable/disable setting range error (error code: 1A5H) occurs.
■Buffer memory address
The following shows the buffer memory address of this area.
• CH Digital clipping enable/disable setting
CH1 CH2 CH3 CH4
510 710 910 1110
■Enabling the setting
Turn on and off 'Operating condition setting request' (Y9).
■Default value
The default value is Disable (1) for all channels.
CH5 CH6 CH7 CH8
1308 1508 1708 1908
CH5 CH6 CH7 CH8
70 72 74 76
CH5 CH6 CH7 CH8
1310 1510 1710 1910
CH9 CH10 CH11 CH12
2108 2308 2508 2708
CH9 CH10 CH11 CH12

Setting content
Enable
Disable
CH9 CH10 CH11 CH12
2110 2310 2510 2710
Appendix 3 Buffer Memory Areas
CH13 CH14 CH15 CH16
2908 3108 3308 3508
CH13 CH14 CH15 CH16
CH13 CH14 CH15 CH16
2910 3110 3310 3510
APPX
A
175