Mitsubishi Electric R60AD8-G User Manual page 195

CH1 Trigger data [Q compatible mode]
In the Q compatible mode, set a buffer memory address to be monitored using a level trigger.
Set the buffer memory address where the target data for monitoring is stored.
■Buffer memory address
The following shows the buffer memory address of this area.
Only the R60AD8-G can use this area.
Buffer memory name
CH1 Trigger data (in Q compatible mode)
■Setting range
The setting range is from 0 to 9999.
If a value out of the range is set, a trigger data setting range error (error code: 1D6H) occurs. Logging cannot be performed.
When 'CH1 Logging enable/disable setting' (Un\G1000) is set to Disable (1), the setting for 'CH1 Trigger data' (Un\G1064) is
ignored.
■Enabling the setting
Turn on and off 'Operating condition setting request' (Y9).
■Default value
The default values are set as shown below.
Channel
CH1
CH2
CH3
CH4
CH5
CH6
CH7
CH8
CH1 Trigger setting value
Set a level to generate a level trigger.
For details on the logging function, refer to the following.
Page 61 Logging Function
■Buffer memory address
The following shows the buffer memory address of this area.
• CH Trigger setting value
CH1 CH2 CH3 CH4
542 742 942 1142
• CH Trigger setting value (in Q compatible mode)
CH1 CH2 CH3 CH4
1082 1083 1084 1085
■Setting range
The setting range is from -32768 to 32767.
■Enabling the setting
Turn on and off 'Operating condition setting request' (Y9).
■Default value
The default value is 0 for all channels.
CH1 CH2
1064 1065
Default value
54
55
56
57
58
59
60
61
CH5 CH6 CH7 CH8
1342 1542 1742 1942
CH5 CH6 CH7 CH8
1086 1087 1088 1089
CH3 CH4 CH5
1066 1067 1068
Buffer memory area to be monitored
CH1 Digital operation value (Un\G54)
CH2 Digital operation value (Un\G55)
CH3 Digital operation value (Un\G56)
CH4 Digital operation value (Un\G57)
CH5 Digital operation value (Un\G58)
CH6 Digital operation value (Un\G59)
CH7 Digital operation value (Un\G60)
CH8 Digital operation value (Un\G61)
CH9 CH10 CH11 CH12
2142 2342 2542 2742
CH9 CH10 CH11 CH12

Appendix 3 Buffer Memory Areas
CH6 CH7 CH8
1069 1070 1071
CH13 CH14 CH15 CH16
2942 3142 3342 3542
CH13 CH14 CH15 CH16
APPX
A
193