Mitsubishi Electric R60AD8-G User Manual page 161

CH1 Digital output value (32 bits)
The A/D-converted digital output value is stored in 32-bit signed binary value.
b31 b30
...
(2)
(1) Data section
(2) Sign bit 0: Positive, 1: Negative
■Buffer memory address
The following shows the buffer memory address of this area.
• CH Digital output value (32 bits)
CH1 CH2 CH3 CH4
410 to 610 to 810 to 1010
411 611 811 to 1011
• CH Digital output value (32 bits) (in Q compatible mode)
CH1 CH2 CH3 CH4
300 to 302 to 304 to 306 to
301 303 305 307
■Refreshing cycle
If averaging processing is performed, values are updated at every averaging process cycle, but if not performed, values are
updated at every sampling cycle.
CH1 Range setting monitor
The input range value set to the input range setting or 'CH1 Range setting' (Un\G598) can be checked.
Monitor value
0H
1H
2H
3H
4H
5H
AH
BH
FH
■Buffer memory address
The following shows the buffer memory address of this area.
• CH Range setting monitor
CH1 CH2 CH3 CH4
430 630 830 1030
Values stored in this area will not be updated because the input range cannot be changed for channels with A/
D conversion disabled. For details, refer to the following.
Page 20 Range Switching Function
...
(1)
CH5 CH6 CH7 CH8
1210 1410 1610 1810
to 1211 to 1411 to 1611 to 1811
CH5 CH6 CH7 CH8
308 to 310 to 312 to 314 to
309 311 313 315
CH5 CH6 CH7 CH8
1230 1430 1630 1830
...
CH9 CH10 CH11 CH12
2010 2210 2410 2610
to 2011 to 2211 to 2411 to 2611
CH9 CH10 CH11 CH12

Description
4 to 20mA
0 to 20mA
1 to 5V
0 to 5V
-10 to 10V
0 to 10V
4 to 20mA (extended mode)
1 to 5V (extended mode)
User range setting
CH9 CH10 CH11 CH12
2030 2230 2430 2630
Appendix 3 Buffer Memory Areas
b0
CH13 CH14 CH15 CH16
2810 3010 3210 3410 to
to 2811 to 3011 to 3211 3411
CH13 CH14 CH15 CH16
CH13 CH14 CH15 CH16
2830 3030 3230 3430
APPX
A
159