Mitsubishi Electric R60AD8-G User Manual page 126

Maximum value/minimum value reset request
Turn on and off 'Maximum value/minimum value reset request' (YD) to clear the maximum and minimum values stored in 'CH1
Maximum value' (Un\G404) and 'CH1 Minimum value' (Un\G406).
For the timing of turning the signal on and off, refer to the following.
Page 122 Maximum value/minimum value reset completed flag
■Device number
The following shows the device number of this output signal.
Signal name
Maximum value/minimum value reset request
Error clear request
Turn on and off Error clear request (YF) to clear 'Error flag' (XF), 'Input signal error detection signal' (XC), 'Latest error code'
(Un\G0), and 'Latest alarm code' (Un\G2). For the timing of turning the signal on and off, refer to the following.
Page 121 Input signal error detection signal
Page 122 Error flag
■Device number
The following shows the device number of this output signal.
Signal name
Error clear request
APPX
124
Appendix 2 I/O Signals
CH1 to CH16
YD
CH1 to CH16
YF