Firmware Version For Sil2 Mode; Reference Product - Mitsubishi Electric R60AD8-G User Manual

8.3

Firmware Version for SIL2 Mode

For application in SIL2 mode, use the R60AD8-G with the following conditions.
• Use a module with firmware version 02 or later.
• Use a module with production information (first four digits) of 0207 or later.
For how to check the firmware version and production information, refer to the MELSEC iQ-R Module Configuration Manual.
8.4

Reference Product

Connector/terminal block converter module for the R60AD8-G
Product
Connector/terminal block converter module
Special cable
Connector/terminal block converter module for the R60DA8-G for diagnostics
Product
Connector/terminal block converter module
Special cable
Terminal module for the RY40PT5B
Product
Terminal module
Special cable
Relay
Product
Analog switching module
8 SYSTEM CONFIGURATION
240
8.3 Firmware Version for SIL2 Mode
Model
FA1-TBS40ADGN
FA-LTB40ADGN
FA-CBL05Q68ADGN
FA-CBL10Q68ADGN
FA-CBL20Q68ADGN
FA-CBL30Q68ADGN
Model
FA1-TBS40DAG
FA-LTB40DAG
FA1-CBL05R60DA8G
FA1-CBL10R60DA8G
FA1-CBL20R60DA8G
FA1-CBL30R60DA8G
Model
FA-THE16YTR20S
FA-CBL06TMV20
FA-CBL10TMV20
FA-CBL20TMV20
FA-CBL30TMV20
Model
M2MNV-13-R/CE-X: Special
Product No.36111
Remarks Contact
 Mitsubishi Electric Engineering Co., Ltd.

Cable length: 0.5m
Cable length: 1.0m
Cable length: 2.0m
Cable length: 3.0m
Remarks Contact

Mitsubishi Electric Engineering Co., Ltd.

Cable length: 0.5m
Cable length: 1.0m
Cable length: 2.0m
Cable length: 3.0m
Remarks Contact

Mitsubishi Electric Engineering Co., Ltd.
Cable length: 0.6m
Cable length: 1.0m
Cable length: 2.0m
Cable length: 3.0m
Remarks Contact

M-System Co., Ltd.