Mitsubishi Electric R60AD8-G User Manual page 191

CH1 Logging cycle setting value
Set a cycle for storing the logging data.
For details on the logging function, refer to the following.
Page 61 Logging Function
■Buffer memory address
The following shows the buffer memory address of this area.
• CH Logging cycle setting value
CH1 CH2 CH3 CH4
537 737 937 1137
• CH Logging cycle setting value (in Q compatible mode)
CH1 CH2 CH3 CH4
1032 1033 1034 1035
■Setting range
The setting range varies depending on the setting in 'CH1 Logging cycle unit setting' (Un\G538).
CH1 Logging cycle unit setting (Un\G538)
ms (1)
s (2)
• If a value out of the range is set, a logging cycle setting value range error (error code: 1D1H) occurs. Logging cannot be
performed.
• If the set logging cycle is below the update cycle of data to be logged, a logging cycle setting disable error (error code:
1D2H) occurs. Logging cannot be performed.
■Enabling the setting
Turn on and off 'Operating condition setting request' (Y9).
■Default value
The default value is 160 for all channels.
CH5 CH6 CH7 CH8
1337 1537 1737 1937
CH5 CH6 CH7 CH8
1036 1037 1038 1039
CH9 CH10 CH11 CH12
2137 2337 2537 2737
CH9 CH10 CH11 CH12

Setting range
10 to 32767
1 to 3600
Appendix 3 Buffer Memory Areas
CH13 CH14 CH15 CH16
2937 3137 3337 3537
CH13 CH14 CH15 CH16
APPX
A
189