3.
Set "Label Name". Set any name in "Label Name" but it must not be duplicated with any other "Label Name".
4.
Click the [...] button to display the "Data Type Selection" window.
5.
Set the following and click the [OK] button.
When more than one SIL2 diagnostic FB library (SIL2 safety program FB and SIL2 standard program FB) are
used, use each SIL2 diagnostic FB library as a single set. In addition, use a different standard/safety shared
label for each set.
10
10 FUNCTIONS
257
10.1 SIL2 Mode