Ambient Operating Temperature - Siemens Sinamics G110M Operating Instructions Manual

10.4

Ambient operating temperature

Temperature
The operating temperature range is shown diagramatically in the figure below:
Figure 10-1
Humidity range
Relative air humidity for the SINAMICS G110M is ≤ 95 % non-condensing.
Shock and vibration
Do not drop the SINAMICS G110M or expose to sudden shock. Do not install the SINAMICS
G110M in an area where it is likely to be exposed to constant vibration.
Electromagnetic radiation
Do not install the SINAMICS G110M near sources of electromagnetic radiation.
Atmospheric pollution and water
When fully assembled the inverter has an IP65/IP66 rating. This means that the inverter is
totally protected against dust and low pressure jets of water. Any unused connections should
be covered with the correct sealing caps to ensure the IP65/IP66 rating.
Note
IP protection of the motor
The motors of the G110M system have a standard IP protection rating of IP54. The IP rating
of the G110M system is determined by the lowest IP rating of its components
Distributed converter for SIMOGEAR geared motors
Operating Instructions, 09/2017, FW V4.7.9, A5E31298649B AH
Power derating for temperature
Technical data
10.4 Ambient operating temperature
343