Siemens Sinamics G110M Operating Instructions Manual page 138

Commissioning
5.5 Restoring the factory settings
5. Press the "Start" button.
6. Wait until the inverter has been reset to the factory setting.
You have reset the inverter to factory settings.
Procedure with the BOP-2 operator panel
Proceed as follows to reset the inverter to factory settings:
1. In the "Options" menu, select the "DRVRESET" entry
2. Confirm the reset using the OK key.
3. Wait until the inverter has been reset to the factory setting.
You have reset the inverter to factory settings.
138
Distributed converter for SIMOGEAR geared motors
Operating Instructions, 09/2017, FW V4.7.9, A5E31298649B AH