Siemens Sinamics G110M Operating Instructions Manual page 116

Commissioning
5.4 Quick commissioning
The DIP switches allows specific functions of the converter to be set and are shown in the
table below.
Table 5- 2 Function of the DIP switches
DIP switch Function
①
Selects current or voltage input for the analog inputs.
Temperature sensor - sets the type of temperature sensor fitted to the motor.
87 Hz characteristic - set "ON" to operate the motor with the 87 Hz characteristic.
Electromechanical (EM) brake - select on if an EM brake is fitted.
Motor reverse
②
Switching frequency - the user can select one of seven different switching frequencies.
Ramp-up and ramp-down timings - user can select from 0.1 seconds to 70 seconds
③
PROFIBUS address DIP-switch for use with the PROFIBUS and USS variant of the CU240M.
Examples of the DIP switches and their individual settings are illustrated in the figures below.
Figure 5-7 PROFIBUS address DIP Switch
116
Distributed converter for SIMOGEAR geared motors
Operating Instructions, 09/2017, FW V4.7.9, A5E31298649B AH