Siemens Sinamics G110M Operating Instructions Manual page 32

Description
3.2 SINAMICS G110M converter
Option
HanQ connector kit
Repair Switch
Wall Mount Kit (WMK)
Compatible motors for the SINAMICS G110M system
The SINAMICS G110M is designed for mounting on SIMOGEAR geared motors. It is
compatible with motors from frame size 71 to frame size 112. For an overview of which
motors can be operated with SINAMICS G110M in combination with SIMOGEAR, please
read FAQ 1097385577 at the following link:
FAQ 1097385577 (https://support.industry.siemens.com/cs/us/en/view/109738577)
For further information on the possible SIMOGEAR geared motors in combination with the
SINAMICS G110M see the MD50.1 catalog, SIMOGEAR geared motors and DT
configurator.
32
Description
Comprises the following connectors:
Connector cap 7/8th internal thread - used for
•
the 24 V power blanking cap
HanQ blanking cap - used for the mains input
•
blankingcap
M12 plastic gland - used for the EM-brake
•
cable entry.
The Repair Switch allows the motor/converter to
be isolated from the mains. This means that all
power to the motor is terminated and the con-
verter cannot start or stop the motor.
The WMK allows the converter to be mounted on
a wall or flat surface separate from the location of
the motor.
Operating Instructions, 09/2017, FW V4.7.9, A5E31298649B AH
Article number
6SL3566-2LA00-0GA0
6SL3555-0PR01-0AA0
6SL3566-1GA00-0GA0
Distributed converter for SIMOGEAR geared motors