Generating A Starter Project - Siemens Sinamics G110M Operating Instructions Manual

6. Then click on "Update". The connected converters are now displayed in "Accessible
nodes".
7. Close this screen form without selecting the converter(s) that has/have been found.
8. Create your STARTER project (Page 129).
You have set the USB interface.
5.4.5.2

Generating a STARTER project

Creating a STARTER project using project wizards
Procedure
To create a project with the STARTER project Wizards, proceed as follows:
1. Using "Project / New with
wizard" create a new project.
2. To start the wizard, click on
"Search online for drive
units ...".
3. Follow the instructions of the
Wizard, and set everything that
you require for your particular
project.
You have created your STARTER project.
Distributed converter for SIMOGEAR geared motors
Operating Instructions, 09/2017, FW V4.7.9, A5E31298649B AH
Commissioning
5.4 Quick commissioning
129