Alarms, Faults And System Messages; Status Led Overview - Siemens Sinamics G110M Operating Instructions Manual

Alarms, faults and system messages

8.1

Status LED overview

LED status indicators
The Power Module has number of dual-colour LEDs which are designed to indicate the
operational state of the Inverter. The LEDs are used to indicate the status of the following
states:
● General fault conditions
● Communication status
The location of the various LEDs on the Power Module and Communications and Power
Interface are shown in the figure below. The Power Interface is attached to the terminal
housing.
Figure 8-1
Distributed converter for SIMOGEAR geared motors
Operating Instructions, 09/2017, FW V4.7.9, A5E31298649B AH
Status LED locations
8
303