Detailed Information On Synchronous Control Setting Area - Panasonic FP7 User Manual

17.7.2 Detailed Information on Synchronous Control Setting Area

Make synchronous control settings in this area. These values set in the Configuration menu
will be stored automatically. Therefore, individual settings are not necessary.
 Synchronous control common setting area
Offset
address
Each axis
synchronous
000H
master axis
selection
Each axis
synchronous output
001H
function
selection
 Electronic gear setting area
Offset
address
010H Each axis gear ratio
- 011H numerator
012H Each axis gear ratio
- 013H denominator
Each axis gear
014H
change time
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
17.7 Unit Memory Synchronous Control Setting Area
Name Default
0000H
0000H
Name Default
1
1
1
Description
Set the master axis for each axis.
Set value Master axis
0000H No synchronous master axis or the target set axis is the
master axis.
0001H 1st axis
0002H 2nd axis
0003H 3rd axis
0004H 4th axis
0010H Virtual axis
0021H Pulse input 1
0022H Pulse input 2
0023H Pulse input 3
0024H Pulse input 4
The state of the synchronous operating function set for the axis
is stored.
bit Functions
0 Electronic gear setting
1 Clutch operation settings
2 Electronic cam operation
settings
3-15 Area reserved for system
Description
1 to 2,147,483,647
1 to 2,147,483,647
1 to 10000
Setting
0: Yes
1: No
17-69