5.4.2 Cam Pattern Settings
Make electronic cam settings in the case of using an electronic cam. Use the Configurator
PM7 to allocate necessary parameters. The following procedure is explained on the condition
that the Configurator PM7 has already started.
PROCEDURE
1. Select "Axis Settings" → "Cam pattern settings" from the menu bar.
The cam pattern setting dialog box will be displayed.
2. Make necessary parameter settings according to the application and press
the [OK] button.
3. Select "File" → "Save Configuration" from the menu bar.
KEY POINTS
•
Parameter information saved can be read on the Configurator PM7.
•
In the case of synchronous control, basic parameters related to I/O operate
according to 5.3 Parameter Settings.
REFERENCE
Refer to Chapter 8: Automatic Operation (Synchronous Control) for parameter
settings related to synchronous control.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
5.4 Synchronous Parameter/Cam Pattern Settings
5-11