Panasonic FP7 User Manual page 183

Error
Error name
code
4044H Speed factor error
4050H Startup speed error
JOG positioning
4080H acceleration/deceler
ation type error
JOG positioning
4081H deceleration time
error
JOG positioning
4082H acceleration time
error
JOG positioning
4083H
target speed error
Home return target
4102H
speed error
Home return
4105H
acceleration time
error
Home return
4106H deceleration time
error
Home return setting
4107H
code error
Home return creep
4110H
speed error
Home return
4111H returning direction
error
Home return limit
4112H
error
Coordinate origin
4120H
error
JOG operation
4201H
target speed error
JOG operation
4203H acceleration/deceler
ation type error
JOG operation
4204H acceleration time
error
JOG operation
4205H deceleration time
error
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Description
The setting of the speed factor
is out of the range.
The startup speed is out of the
range.
The acceleration/deceleration
method of the JOG positioning
is out of the range.
The deeleration time of the JOG
positioning is out of the range.
The acceleration time of the
JOG positioning is out of the
range.
The target speed of the JOG
positioning is out of the range.
The target speed of the home
return is out of the range.
The acceleration time of the
home return is out of the range.
The deceleration time of the
home return is out of the range.
The home return setting code is
incorrect.
The creep speed of the home
return is out of the range.
The moving direction of the
home return is incorrect
The limit switch is disabled.
(It occurs when the home return
method is set to the limit
method 1 or 2.)
The coordinate origin is out of
the range.
The target speed of the JOG
operation is out of the range.
The acceleration/deceleration
type of the JOG operation is
incorrect.
The acceleration time of the
JOG operation is out of the
range.
The deceleration time of the
JOG operation is out of the
range.
15.3 Error Code Table
Object Recovered
Each
Yes
axis
Each
Yes
axis
Each
Yes
axis
Each
Yes
axis
Each
Yes
axis
Each
Yes
axis
Each
Yes
axis
Each
Yes
axis
Each
Yes
Check the set value.
axis
If an error occurs repeatedly
Each
with the correct set values,
Yes
axis
consult your Panasonic
representative.
Each
Yes
axis
Each
Yes
axis
Each
Yes
axis
Each
Yes
axis
Each
Yes
axis
Each
Yes
axis
Each
Yes
axis
Each
Yes
axis
Countermeasures
15-11