Connecting Deviation Counter Clear Output Signal - Panasonic FP7 User Manual

Wiring

3.5 Connecting Deviation Counter Clear Output Signal

The following diagram shows an example of connection to the counter clear input of the serve
motor driver. This connection requires an external power supply of 5 to 24 V DC.
Connection
Deviation
Counter Clear
(Open collector)
Note:
• Be sure to use a twisted-pair cable.
• A maximum of 10 mA can flow as a deviation counter clear output signal.
Add appropriate resistance if the current is in excess.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com 3-10
Positioning unit
A7,A16
B7,B16
Power supply
GND +5 to +24V DC
If 10 mA is exceeded
a registor must be
added.
Output specifications
Output form
Operating voltage range
Max. load current
ON Max. voltage drop
Motor driver
Open collector
4.75 to 26.4V DC
10 mA
1V