Panasonic FP7 User Manual page 145

 Settings
Parameters required for the pulser operation of the positioning unit is set in the positioning
setting menu of the programming tool.
Items
Operation setting code
Pulser operation ratio numerator
Pulser operation ratio denominator
Pulser operation method
Pulser operation max. speed
 Operation diagram
 Operation of each contact
• The BUSY flag (X118) indicating the state that a motor is running will turn ON when the
pulser operation permit contact turns ON and will turn OFF when the contact turns OFF.
• The operation done flag (X120) indicating the state of operation completion will turn ON
when the pulser operation permit contact is turned OFF and the flag will be maintained until
the next positioning control, JOG operation, home return, or pulser operation starts.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
11.1 Setting and Operation of Pulser Operation
Setting example
0: Pulser 1
2
1
2: Speed limits
(truncated)
500
Settable range
0: Pulser 1
1: Pulser 2
2: Pulser 3
3: Pulser 4
1 to 32,767
1 to 32,767
0: Standard operation 1: Speed limits (pulse hold)
2: Speed limits (truncated)
Pulse: 1 to 32,767,000 pps
11-3