Dwell Time - Panasonic FP7 User Manual

Supplementary Functions

13.1 Dwell Time

The time taken until the next operation after the completion of an executed positioning table in
the automatic operation is called dwell time.
 For E-point control
The dwell time is the time taken from the completion of the position reference until the
operation done flag turns ON.
 For P-point control
While the positioning unit is in P-point control, the positioning table will operate consecutively,
and the dwell time will be ignored. For the last table (E point), like E-point control, dwell time is
a period required from the completion of the position reference until the operation done flag
turns ON.
 For C-point control
The dwell time is the waiting time for executing the next table from the completion of the
positioning table (deceleration stop). For the last table (E point), like E-point control, dwell time
is a period required from the completion of the position reference until the operation done flag
turns ON.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com 13-2