Synchronous Group Setting Area - Panasonic FP2-PP2T Technical Manual

17.4.5 Synchronous Group Setting Area

For the synchronous operation, one slave axis is set for a master axis, and a maximum of 2 groups can
be specified for the gourp of synchronous operation.
Offset
Bank Name
address
Synchronous
group 1
0B7H
Synchronous
mode
Synchronous
0B8H group 1
Master axis
Synchronous
0B9H group 1
Slave axis
00H
Synchronous
group 2
0BAH
Synchronous
mode
Synchronous
0BBH group 2
Master axis
Synchronous
0BCH group 2
Slave axis
Descriptions
Set the operation mode of synchronous operation.
00H: Synchronous mode A 01H: Synchronous mode B
Turn on the corresponding bits to be the master and slave axes for the
synchronous operation.
Each synchronous axis can be set for one axis only.
Set the operation mode of synchronous operation.
00H: Synchronous mode A 01H: Synchronous mode B
Turn on the corresponding bits to be the master and slave axes for the
synchronous operation.
Each synchronous axis can be set for one axis only.
17-15