Panasonic FP7 User Manual page 233

Offset
Name
address
Software limit
00BH enabled/
disabled settings
00CH
Upper limit of
software limit
00DH
00EH
Lower limit of
software limit
00FH
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
17.6 Details of Each Axis Setting Area in Unit Memory
Default
Enables or disables the software limit on each control.
bit
0
1
0H
2
15 to 3
Set the upper limit of the software limit for the absolute coordinates.
Set the following range according to the unit setting.
Pulse: -1,073,741,823 to 1,073,741,823 pulses
μm (0.1 μm): -107,374,182.3 to 107,374,182.3 μm
μm (1 μm): -1,073,741,823 to 1,073,741,823 μm
1,073,741,823
inch (0.00001 inch): -10,737.41823 to 10,737.41823 inches
inch (0.0001 inch): -107,374.1823 to 107,374.1823 inches
degree (0.1 degree): -107,374,182.3 to 107,374,182.3 degrees
degree (1 degree): -1,073,741,823 to 1,073,741,823 degrees
Any other settings will be errors.
Set the upper limit of the software limit for the absolute coordinates.
Set the following range according to the unit setting.
Pulse: -1,073,741,823 to 1,073,741,823 pulses
μm (0.1 μm): -107,374,182.3 to 107,374,182.3 μm
μm (1 μm): -1,073,741,823 to 1,073,741,823 μm
1,073,741,832
inch (0.00001 inch): -10,737.41823 to 10,737.41823 inches
inch (0.0001 inch): -107,374.1823 to 107,374.1823 inches
degree (0.1 degree): 0.0 to 359.9 degrees
degree (1 degree): 0 to 359 degrees
Any other settings will be errors.
Setting range and description
Name Default
Enables/disables 0
the software limit
for positioning
control
Enables/disables 0
the software limit
while the
positioning unit
is in home return
operation
Enable/disable 0
the software limit
in the JOG
operation
− −
Description
0: Disables the software limit
for positioning control
1: Enables the software limit
for positioning control
0: Disables the software limit
for home return control
1: Enables the software limit
for home return control
0: Disables the software limit
for JOG operation
1: Enables the software limit
for JOG operation
−
17-41