Ip Address/Subnet Mask/Gate Way Address; Operation Mode - IDK MSD-501 User Manual

7.12.1 IP address/subnet mask/gate way address

Menu IP address: Top→LAN→IP ADDRESS
Subnet mask: Top→LAN→SUBNET MASK
Gateway address: Top→LAN→GATEWAY ADDRESS
Setting value [Default]: IP address: 192.168.1.199
You can set IP address, subnet mask, and gateway address.
The setting of this menu is not updated until the MENU/SET key is pressed. Make sure to press the
MENU/SET key to update the setting.

7.12.2 Operation mode

Menu Top→LAN→FUNCTION
Setting for Each connection
Setting value
Setting
Operation mode
Destination IP address
PJLink protocol connection
Destination connection port
*1
number
PJLink protocol password
1
: If selecting "ON" for PJLink protocol, the target port number is fixed at "4352".
*
*2
: Up to 32 characters. If you do not want the password authentication, you do not need to set the item.
You can set the LAN operation mode consisting of "RECEIVER" mode that controls the MSD externally and
"TRANSMITTER" mode that controls peripheral devices from the MSD.
If you select "TRANSMITTER" mode, you need to set the information of connecting device.
The setting of this menu is not updated until the MENU/SET key is pressed. Make sure to press the
MENU/SET key to update the setting.
Subnet mask: 255.255.255.0
Gateway address: 192.168.1.200
Receiver mode
RECEIVER [Default]
Not necessary
Not necessary
Not necessary
*2
Not necessary
MSD-501/502/701/702 User's Guide
Operation mode
Transmitter mode
TRANSMITTER
0.0.0.0 to 255.255.255.255
[Default] 192.168.1.198
ON: Use
OFF: Not use [Default]
1 to 65535 [Default]: 1100
20,30 to 39 in ASCII code (in hex)
41 to 5A, 61 to 7A [Default]: 20 (space)
69