ABB SACE Emax E1.2 Operating Instructions For The Design Engineer page 280

274 | © 2017 ABB | 1SDH001330R0002 - ECN000058721 Rev. A
Continued from the previous page
To extract the moving part from the fixed part, perform the same steps indicated for insertion in reverse order.
Figure 63
Always use both levers of the guides on the fixed part when racking out the circuit-breaker. See Figure 63.
=
Figure 64
WARNING! When withdrawing the moving part, make sure that both guides on the
fixed part travel to the same extent, thereby keeping the moving part parallel to the
fixed part. See Figure 64.
OK
NO!
Mechanical accessories | 4 - Operating modes for E2.2-E4.2-E6.2
ABB | SACE Emax 2
=